Shelly Flood WiFi Water Alarm Sensor

The Shelly Flood detects water and has a built-in temperature sensor. You can use the Shelly Flood to monitor water leaks and faulty washing machines, dishwashers, lift pumps, and sewage pumps. The Shelly connects to the WLAN and sends you an alarm message on your mobile phone as soon as water is detected. The Shelly Flood is powered by a CR123A - 3V battery (not included), with which you can achieve runtimes of up to 18 months.

Features:

Alerts in case of water. Thus, larger water damages can be avoided
With the Shelly Cloud App, you can display the temperature and alarms on your smartphone or tablet
Shelly Flood has an integrated WEB interface through which you can make settings on the Shelly or perform an OTA update
The Shelly Flood can already communicate via MQTT with the delivered firmware version. Thus, simple integration into an existing home automation system is possible
With the Shelly Flood, you can control other Shelly products and, for example, switch your heating on and off depending on the temperature
If the Shelly Flood is operated via the cloud, it stores the history of the temperature over years
Battery life up to 18 months
The Shelly Flood can be directly connected to your Wi-Fi network without needing an additional controller or gateway
Open REST API and MQTT support ioBroker, Home Assistant, openHAB, Domoticz

Recommended Accessories:

CR123A Battery 3V 1500mAh

Documentation and Downloads:

Technical Details:

Manufacturer: Allterco
Color: White
Temperature measurement range: -20°C to 50°C (± 1°C)
Battery: CR123A 3V (not included)
Battery life: up to 18 months
Operating temperature: -40 to 60°C
Wireless signal strength: 1mW
Wireless protocol: WiFi 802.11 b/g/n
Frequency: 2400 - 2500MHz
Range: up to 30m outdoors and up to 15m indoors (depending on building materials)
Dimensions (Diameter x Height): 70 x 19 mm
Weight: 71g