RS485-BL LoRaWAN to RS485/UART Converter 868MHz

This is a RS485/UART to LoRaWAN Converter from Dragino. With the RS485-BL, you can turn a 3.3V/5V UART or a RS485 sensor into a LoRaWAN sensor node. The RS485-BL is powered by an 8500 mA Li-SOCI2 battery and can run for several years depending on the sensor. The RS485-BL is IP66 water and dustproof, making it ideal for outdoor use. The Lora part of the module is based on the SX1276, which allows the user to send data over very long distances at low data rates. It provides broadband spread communication and high interference resistance with minimal power consumption. Each RS485-BL is pre-loaded with a set of unique keys for LoRaWAN registrations. These keys are registered on the local LoRaWAN server and the RS485-BL automatically connects after powering on, if network coverage is available.

Recommended Accessories:

• Mini USB UART FTDI Programmer 3.3/5V USB Serial
  
• For firmware update: ST-LINK V2 ST-LINK V2 Debugger Programmer for STM8 STM32
• WisGate Edge Lite 2 LoRaWan Multi-Channel Gateway
• LIG16 Indoor Multichannel LoRaWAN Gateway
• DLOS8 Outdoor Multichannel LoRaWAN Gateway

Features:

• LoRaWAN 1.0.3 A Class
  
• Configurable baud rate
  
• IP66 Water and dustproof housing
  
• Low power consumption
  
• Alarm function
  
• AT commands to set parameters
  
• 8500mAh battery with long life

Documentation:

• User Manual and Datasheet

Technical Details:

• Manufacturer: Dragino
• Manufacturer SKU: RS485-BL-EU868-12
• Frequency: 868Mhz
• IP66 waterproof housing (Screwing and lid screws must be tightened correctly)
• Cable gland: M12
• Interface: UART/RS485
• Battery: 8500mAh Lipo battery
• LoRa Version: LoRaWAN 1.0.3 Class A
• Housing Dimension: 93 x 53 x 47mm
• Weight: 190g

Package Includes:

• 1x RS485-BL LoRaWAN to RS485/UART Converter 868MHz