PolyTerra PLA Lime Green Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to achieve reliable results. It is based on a bio-based material specially developed for uncomplicated processing and high print quality. The matte surface gives prints a modern and high-quality look. The excellent layer adhesion ensures stable components, while warping is minimized. Thanks to the balanced combination of strength and flexibility, both decorative models and functional prototypes can be reliably produced. The processing is almost odorless and very stable even during long print times. PolyTerra PLA is wound on an environmentally friendly cardboard spool, thus emphasizing the sustainable approach of the product line. Typical applications include demonstration models, housings, components with visual requirements, and projects where environmental awareness and print quality are equally important.

Properties:

• PolyTerra PLA is a bio-based filament with a sustainable character.
• The matte surface gives printed objects a modern appearance.
• The material offers a good balance between strength and flexibility.
• The layer adhesion is stable and ensures precise results.
• The processing is almost odorless.
• Warping occurs only to a small extent.
• PolyTerra PLA can be processed with consistent print quality.
• The cardboard spool supports the ecological approach of the product.

Recommended Print Parameters:

• Print temperature: 190–230 °C, recommended 200 °C
• Heated bed: 25–60 °C, recommended 50 °C
• Fan: 100%
• Print speed: 50-300mm/s

Documentation:

• Wiki and Datasheets Polyterra

Technical Data:

• Manufacturer: Polymaker
• Manufacturer SKU: PA04027
• Color: Lime Green
• Weight (net): 1 kg
• Diameter: 1.75 mm
• Tolerance: ±0.05 mm
• Density: 1.31 g/cm³
• Melt Flow Index: 14–20 g/10 min (210 °C/2.16 kg)
• Tensile Strength (XY): 23.2 MPa
• Tensile Strength (Z): 12.2 MPa
• Elongation at Break (XY): 27.8 %
• Elongation at Break (Z): 0.9 %
• Flexural Strength (XY): 40.4 MPa
• Flexural Modulus (XY): 2209 MPa
• Impact Strength (Charpy XY): 6.7 kJ/m²
• Heat Deflection Temperature (HDT 0.45 MPa): 57.8 °C
• Spool Diameter outside: 200 mm
• Spool Width: 65 mm
• Hole Diameter inside: 55 mm
• Weight (gross): 1291g
• Dimensions: 205 x 225 x 75mm

Scope of Delivery:

• 1x PolyTerra PLA Lime Green Filament 1.75mm 1Kg