Polymaker HT-PLA-GF Power Tool Yellow Filament 1.75mm 1Kg

Polymaker HT-PLA-GF is a glass fiber reinforced high-temperature filament that combines the easy printability of PLA with the high stability of engineering compounds. Thanks to the glass fiber content, it offers exceptional rigidity, low shrinkage, and high dimensional stability. Components remain dimensionally stable up to 130°C after annealing, making them suitable for applications that are mechanically and thermally demanding. Despite the reinforcement, the material is reliably printable and achieves print speeds of up to 350 mm/s. Particularly noteworthy is the good paintability as expected from PLA: surfaces can be easily primed, painted, or decorated, making the filament ideal for model making as well as for cosplay, tabletop, or custom vehicle parts. This opens up possibilities with HT-PLA-GF that would otherwise only be achievable with technical materials like ABS or ASA – but without their drawbacks such as limited color selection, complex processing, or higher printing requirements. Due to the glass fiber reinforcement, the material is abrasive on nozzles, so the use of a hardened nozzle is highly recommended. During processing, there is a low odor development, stronger than PLA, but much more pleasant than ASA or ABS.

Properties:

• HT-PLA-GF offers high temperature resistance and remains dimensionally stable up to 130°C after annealing.
• Glass fiber reinforcement provides exceptional rigidity and stability.
• Very low shrinkage for accurate and precise components.
• High layer adhesion and reliable printability.
• Low odor development, more pleasant than ASA or ABS.
• Paintability as expected from PLA, ideal for model making, tabletop, and cosplay.
• High print speed of up to 350 mm/s possible.
• Abrasive due to glass fiber – hardened nozzle recommended.

Recommended Printing Parameters:

• Printing temperature: 210–230 °C, recommended 230 °C
• Heated bed: 25–60 °C, recommended 50 °C
• Fan: 100 %
• Print speed: up to 350 mm/s

Annealing: Place the finished part on a flat, heat-resistant surface and temper in the oven at approximately 100 °C for 30 minutes. Then let it cool slowly in the oven to prevent warping.

Documentation:

• Product Overview HT-PLA
• Data Sheets HT-PLA

Technical Data:

• Manufacturer: Polymaker
• Manufacturer SKU: PA18006
• Color: Power Tool Yellow 
• Weight (net): 1 kg
• Diameter: 1.75 mm
• Tolerance: ±0.02 mm
• Density: 1.337 g/cm³
• Melt Flow Index: 22.9 g/10 min (210 °C/2.16 kg)
• Tensile Strength (XY): 50.2 MPa
• Tensile Strength (Z): 22.5–23.7 MPa
• Elongation at Break (XY): 2.3–2.8 %
• Elongation at Break (Z): 0.8–0.9 %
• Flexural Strength (XY): 86.4–87.8 MPa
• Flexural Strength (Z): 29.2 MPa
• Flexural Modulus (XY): 3685–4207 MPa
• Flexural Modulus (Z): 1954–2198 MPa
• Impact Strength (Charpy XY): 4.9–5.3 kJ/m²
• Impact Strength (Charpy Z): 4.3–4.4 kJ/m²
• Heat Deflection Temperature (HDT 0.45 MPa): 75.5 °C (as printed), 114.7 °C (annealed)
• Spool Diameter Outside: 200 mm
• Spool Width: 65 mm
• Hole Diameter Inside: 55 mm
• Weight (gross): 1266
• Dimension: 205 x 225 x 75mm

Scope of Delivery:

• 1× Polymaker HT-PLA-GF Power Tool Yellow Filament 1.75mm 1Kg