PLA+ Filament 1.75mm Pine Green 1Kg eSun

PLA Plus Pine Green PLA+175PG1 from eSun is based on a standard PLA filament. The following properties have been optimised:

• Brittleness
• Break Strength
• Layer Adhesion
• Flame Retardant
• Odourless during printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers a very good value for money. It's not only easier to use, but it also produces better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is great for beginners and professionals, is easy to print and offers good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS when something needs to be break-resistant, e.g. printed children's toys! PLA+ has very good elasticity and bending resistance to resist falls, shocks and breaks due to strain. No odours are produced when printing with PLA+, like with ABS.

PLA+ properties:

• Very resistant
• Easy to print
• Very good adhesion to the print board
• Top print quality and super value for money

Recommended PLA+ print parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Colour: Pine Green
• Item number: PLA+P175PG1
• Filament Weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 205-225°C
• Density: 1.24g/cm3
• Melt Flow Index: 2g/10min
• Impact resistance: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Dimensional stability: 52°C
• Spool size Diameter outside: 20cm
• Spool Width: 6.7cm
• Diameter inside (hole): 5.3cm
• Filament Weight: 1000g
• Empty Spool Weight: 278g
• Total Weight: 1460g
• Dimension: 205 x 215 x75mm

Delivery Content:

• 1x PLA+ Filament 1.75mm Pine Green 1Kg eSun