Panda Breath Smart Chamber Heater and Air Filter for Bambu/Snapmaker

The BIQU Panda Breath is a 3-in-1 smart module for 3D printers, combining active chamber heating, HEPA activated carbon air filtration, and filament drying into one device. The integrated 300 W PTC heating element rapidly and evenly brings the print chamber up to 60 °C – preventing warping with engineering filaments like ABS, ASA, PC, and PA, and improving first layer adhesion as well as layer bonding with all filaments. The dual HEPA activated carbon filter actively draws in chamber air, captures VOCs (volatile organic compounds), fine particles, and odors, and returns clean, heated air back into the chamber.

Note: NOT compatible with Bambu Lab P2S.

Recommended Accessories:

• Panda Breath Replacement Filter Set HEPA and Activated Carbon

Features:

• 300 W PTC heating element brings the print chamber up to 60 °C – prevents warping with ABS, ASA, PC, PA and improves first layer adhesion with all filaments
• Dual HEPA activated carbon filter captures VOCs and fine particles; reduces printer odors and protects breathing air in the work space
• 3-in-1 function: Chamber heater, air filter, and filament dryer in a single device – filament drying in idle mode without separate device
• Bambu Lab P1S/P1P/X1C/A1 (with Panda Shelter): fully automatic control via bed temperature monitoring via web UI
• Klipper printers (Snapmaker U1, Voron, Trident, VZBot): manual control initially, automatic control via firmware update
• Double hardware and software overheat protection, quick-flash interface for DIY firmware updates and web UI configuration via WLAN

Application Examples:

• Printing of ABS, ASA, PC, and PA with active chamber heating to prevent warping and layer separation
• Odorless printing operation in living rooms and offices through HEPA activated carbon filtration of chamber air
• Filament drying in printer idle mode for moisture-sensitive materials such as PA, PETG, and TPU
• Combined control with Bambu Lab X1C or P1S via web UI with automatic activation at print start
• Enhancing Klipper-based printers (Snapmaker U1, Voron) with engineering filament capability

Documentation:

• BIQU Wiki – Panda Breath

Technical Data:

• Manufacturer: BIQU
• Manufacturer SKU: 1060000855
• Heating element: PTC, 300 W
• Maximum chamber temperature: 60 °C
• Air filter: HEPA + activated carbon (dual filter)
• Filter replacement interval: 3–6 months (depending on use)
• Functions: Chamber heating, air filtration, filament drying
• Control: Web UI (WLAN) and buttons on the device
• Safety: Double thermal protection (hardware + software)
• Bambu Lab Compatibility: P1S, P1P, X1C, A1 (with Panda Shelter)
• Klipper Compatibility: Snapmaker U1, Voron 2.4, Trident, VZBot (manual, auto mode in firmware update)
• Note: NOT compatible with Bambu Lab P2S
• Package dimensions: 331 × 261 × 84 mm
• Gross weight: 2180 g

Scope of Delivery:

• 1× Panda Breath Smart Chamber Heater
• 1× HEPA activated carbon filter (pre-installed)
• 1× Y power cable
• 1× Mounting screws set (M3 × 8)
• 1× USB cable