LilyGo TTGO LoRa32 868MHz 0.96 Inch OLED Display with LoRa, Bluetooth and Wi-Fi

This is a small 0.96 inch OLED display module by Lilygo. The integrated ESP32 controller features full Bluetooth and Wi-Fi connectivity. In addition, the module is EU868 LoRa compatible, and even includes an SD card slot. The module can, for example, be used with a LiPo battery as an autonomous display, which can be controlled over great distances thanks to the LoRaWAN connectivity.   

Recommended Accessories: 

• LiPo Battery 1000mAh JST 1.25 / Lithium Ion Polymer for LoRa TTGO

Features: 

• 0.96 inch OLED Display 
  
• ESP32 with Bluetooth and Wi-Fi 
  
• EU868 LoRaWAN compatible 
  
• JST SH1.25 LiPo connector with TP4054 battery charging chip 
  
• On/Off slide switch 

Documentation: 

• Lilygo LoRa Github
• Paxcounter Github

Technical Details: 

• Manufacturer: Lilygo 
• Manufacturer SKU: Q168 
• Version: T3_V1.6.1  
• Display technology: OLED 
• Chip: CH9102F 
• Display size: 0.96 inch 
• Working voltage: 1.8-3.7V 
• Current: 10-14mA 
• Current in transmission mode: 120mA@20dBM 
• LoRa Frequency: 868MHz 
• Transmission: 20dBm 
• Received: -139dBm@LoRa &62.5Khz&SF=12&146bps 
• Frequency tolerance: ±1^KHz 
• FIFO space: 64Byte 
• Data rate: 1.2K~300Kbps@FSK 0.018K~37.5Kbps@LoRa 
• Interface: SPI 
• USB Interface: MicroUSB 
• Operating temperature: -40°C – 85°C 
• Dimensions: 75 x 27 x 10mm 
• Weight: 31g 

Scope of Delivery: 

• 1x LilyGo TTGO LoRa32 V2.1 868MHz 0.96 Inch OLED Display with LoRa, Bluetooth and Wi-Fi 
• 1x SMA Antenna 
• 1x Power Cable 
• 2x 13pin Header