DFRduino UNO R3 Arduino Compatible Board

The DFRduino Uno V3.0 from DFRobot is an Arduino compatible board for schools or for hobbyists. It's a great entry-level microcontroller board that is fully compatible with the Arduino UNO R3 and the open-source development environment Arduino IDE. The ATmega16U2 is installed on this board as a USB-to-serial converter. An added benefit is that the AVR chip in the DIP package is used in the DFRduino UNO R3 board. This allows you to easily remove the chip to update or reprogram the firmware, or even to put it on a finished, more compact project. The headers have different colors to indicate different types of I/O ports:

  • Red for the power part.
  • Blue for analog I/O.
  • Green for digital I/O.

These colors match the sensor cables from DFRobot, making it very easy to figure out where to connect the sensors, or to determine which side is analog (blue) or digital (green). Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (six of which can be used as PWM outputs), six analog inputs, a 16 MHz quartz oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.


Technical Details:

  • Manufacturer: DFRobot
  • Manufacturer SKU: DFR0216
  • Microcontroller: ATmega328 (DIP case)
  • USB-UART Interface: ATmega16U2
  • Operating voltage: 5V
  • Input voltage (recommended): 7 to 12V DC
  • Input voltage (limits): 6 to 20V DC
  • PC connection socket: USB-B / USB Type B
  • DC connection: Barrel Jack 5.5mm / 2.1mm
  • Digital I/O pins: 14 (of which 6 with PWM output)
  • Analog input pins: 6
  • DC current per I/O pin: 40 mA
  • DC current for 3.3V pin: 50 mA
  • Flash memory: 32 KB, of which 2KB used by the bootloader
  • SRAM: 2KB (ATmega328)
  • EEPROM: 1KB (ATmega328)
  • Clock speed: 16MHz
  • Dimensions: 75 x 54 x 15mm
  • Weight: 45g

Package Includes:

  • 1x DFRduino UNO R3 Arduino compatible board


Write a review

Note: HTML is not translated!
    Bad           Good

DFRduino UNO R3 Arduino Compatible Board

  • Brand: DFRobot
  • Product Code: 421441
  • Availability: In Stock
  • CHF21.90

  • Ex Tax: CHF20.26

Related Products

Prototype Shield V5 for Arduino UNO

Prototype Shield V5 for Arduino UNO

With this shield, you can easily build prototype circuits. The proto shield can be fitted onto an Ar..

CHF5.90 Ex Tax: CHF5.46

LCD 1602 Keypad Shield for Arduino UNO

LCD 1602 Keypad Shield for Arduino UNO

This Keypad Shield is perfect for initial attempts to control a display using an Arduino. The 5 butt..

CHF11.90 Ex Tax: CHF11.01

CNC Shield A4988 Arduino for 3D Printers and Milling Machines (GRBL)

CNC Shield A4988 Arduino for 3D Printers and Milling Machines (GRBL)

This shield is perfect for building a CNC machine! But you can also use it for other mechanical Ardu..

CHF8.90 Ex Tax: CHF8.23

Arduino UNO compatible board Atmega328P DIP

Arduino UNO compatible board Atmega328P DIP

This Arduino UNO compatible board is of high quality. Each board is tested for function and quality...

CHF13.95 Ex Tax: CHF12.91

2.8inch TFT Touch Screen Shield for Arduino

2.8inch TFT Touch Screen Shield for Arduino

This practical and affordable TFT Touch Screen Shield can be easily attached to your Arduino. With t..

CHF23.90 Ex Tax: CHF22.11

Arduino UNO Rev.3 SMD Board Atmega328

Arduino UNO Rev.3 SMD Board Atmega328

The original Arduino Uno Rev3 SMD is a microcontroller board based on the ATmega328P. This latest ve..

CHF27.90 Ex Tax: CHF25.81

Bluno - Arduino UNO compatible Bluetooth 4.0 (BLE) Board

Bluno - Arduino UNO compatible Bluetooth 4.0 (BLE) Board

This Arduino UNO compatible board with Bluetooth is perfect if you want to control your Arduino proj..

CHF24.90 Ex Tax: CHF23.03

DFrobot Starter Kit for Arduino

DFrobot Starter Kit for Arduino

The DFrobot Starterkit V3 is one of the four best starter kits. The Arduino Beginner Starter Kit fro..

CHF64.90 Ex Tax: CHF60.04

USB Cable 2.0 A-B 30cm Blue

USB Cable 2.0 A-B 30cm Blue

The cable is suitable for programming the classic Arduino with USB B port.Technical Details:Connecto..

CHF3.90 Ex Tax: CHF3.61

DFRduino Nano Arduino Compatible Board

DFRduino Nano Arduino Compatible Board

The DFRduino Nano USB Microcontroller with an ATMega328 is a breadboard-capable version of the Ardui..

CHF14.90 Ex Tax: CHF13.78

USB Cable 2.0 A-B 200cm Grey

USB Cable 2.0 A-B 200cm Grey

This 2m long USB cable is suitable for programming the classic Arduino with USB B port.Technical Det..

CHF4.90 Ex Tax: CHF4.53

DFRduino Leonardo Arduino Compatible Board

DFRduino Leonardo Arduino Compatible Board

The DFRobot Leonardo with Xbee Socket is a board compatible with the Arduino Leonardo. The Arduino L..

CHF19.50 Ex Tax: CHF18.04

Arduino the Comprehensive Handbook by Claus Kühnel

Arduino the Comprehensive Handbook by Claus Kühnel

This Arduino book by Claus Kühnel is aimed at Arduino beginners as well as advanced Arduino users. T..

CHF52.90 Ex Tax: CHF48.94

Ethernet Shield W5200 for Arduino

Ethernet Shield W5200 for Arduino

With this Ethernet Shield, you can easily connect your Arduino projects to the internet. The shield ..

CHF21.90 Ex Tax: CHF20.26

USB 2.0 Cable Type A-B black 3m

USB 2.0 Cable Type A-B black 3m

This 3m long USB cable is suitable for programming the classic Arduino with USB B socket or for conn..

CHF9.90 Ex Tax: CHF9.16

Gravity Screw Terminal Shield V2 for Arduino

Gravity Screw Terminal Shield V2 for Arduino

This Screw Shield from DFRobot is made up of two parts that can each be attached to the Arduino UNO ..

CHF10.90 Ex Tax: CHF10.08

RS485 Shield for Arduino UNO

RS485 Shield for Arduino UNO

This is an RS485 Shield for the Arduino UNO. RS485 is an industrial standard for communication over ..

CHF13.90 Ex Tax: CHF12.86

Gravity RS485 IO Expansion Shield for Arduino

Gravity RS485 IO Expansion Shield for Arduino

This is a RS485 Shield from DFRobot for your Arduino Board. The IO Shield supports RS485 and has add..

CHF11.90 Ex Tax: CHF11.01

Gravity IO Expansion Shield for Arduino V7.1

Gravity IO Expansion Shield for Arduino V7.1

This is a Gravity Extension Shield by DFRobot. The IO Expansion Shield allows you to connect various..

CHF11.90 Ex Tax: CHF11.01

Dragino LA66 LoRaWAN Shield 868MHz

Dragino LA66 LoRaWAN Shield 868MHz

With this LoRaWAN Shield from Dragino, you can easily equip your Arduino with LoRa connectivity. The..

CHF24.90 Ex Tax: CHF23.03

Screw Terminal Prototype Shield for Arduino

Screw Terminal Prototype Shield for Arduino

This is a prototype shield with screw terminals and perforated grid, perfect for Arduino UNO and Meg..

CHF7.90 Ex Tax: CHF7.31

Arduino Create Your UNO Kit

Arduino Create Your UNO Kit

The original Arduino Make Your UNO Kit is an educational tool that aids you in learning about electr..

CHF64.90 Ex Tax: CHF60.04

Arduino Starter Kit German

Arduino Starter Kit German

The original Arduino Starter Kit is a comprehensive tool for learning electronics and programming, c..

CHF89.90 Ex Tax: CHF83.16

Arduino Uno Rev3

Arduino Uno Rev3

The original Arduino UNO is a microcontroller board based on the ATmega328P with 14 digital input / ..

CHF28.90 Ex Tax: CHF26.73

Arduino UNO R4 Minima

Arduino UNO R4 Minima

The improved and expanded Arduino UNO R4 Minima is equipped with a powerful 32-bit microcontroller f..

CHF20.90 Ex Tax: CHF19.33

Arduino UNO R4 WiFi

Arduino UNO R4 WiFi

Introducing to you the Arduino UNO R4 WiFi! This board combines the computing power and exciting new..

CHF29.90 Ex Tax: CHF27.66

Gravity: Starter Kit for Arduino

Gravity: Starter Kit for Arduino

The Gravity Starter Kit for Arduino provides an ideal introduction to the world of electronics and p..

CHF75.90 Ex Tax: CHF70.21

Gravity: Advanced Kit for Arduino

Gravity: Advanced Kit for Arduino

The Gravity: Advanced Kit for Arduino from DFRobot is ideal for getting started in the world of elec..

CHF94.50 Ex Tax: CHF87.42

Tags: Arduino, UNO, Board, USB-B, Barrel Jack, Analog, SPI, I2C, Atmega328, DIP, USB Type B, ATmega16U2, DFRobot, DFR0216