ABS+ Fire Brigade Red Filament 1.75mm 1Kg eSun

ABS Plus by eSun is an improved ABS filament that prints much better and has very minimal wrap. ABS+ is ideal for advanced users, it is easy to print compared to standard ABS and also provides good adhesion properties with almost no wrap effect during printing! ABS+ is the alternative to ABS. ABS+ has excellent toughness and impact resistance to withstand falls, shocks, and fractures due to elongation. The printed surface of ABS+ cannot be smoothened after the fact with a solvent. However, ABS+ can be mechanically worked on more easily with, for example, sandpaper.

Features:

• Highly resistant
• Reliable bed adhesion
• Lower shrinkage rate, thus minimal wrapping
• Optimal layer adhesion
• Good toughness
• Resistant to many oils

Recommended ABS+ printing parameters:

• Printing temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20% Recommendation: 15% or switch off
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Data Sheet Filament

Technical details:

• Colour: Fire Brigade Red 
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact toughness: 42kJ/m²
• Elongation at fracture: 30%
• Tensile strength: 40MPa
• Dimensional stability: Approx. 90°C
• Spool size outer diameter: 20cm
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 229g
• Total weight: 1423g
• Dimensions: 205 x 215 x75mm

Delivery content:

• 1x ABS+ Fire Brigade Red filament 1.75mm 1Kg eSun