ABS+ Brown Filament 1.75mm 1Kg eSun

ABS Plus from eSun is an improved ABS filament that prints much better and has very little warping. ABS+ is suitable for advanced users, is easy to print compared to standard ABS, and also offers good adhesion properties and almost no warp effect when printing! ABS+ is the alternative to ABS. ABS+ has very good toughness and impact resistance to withstand falls, shocks, and breaks due to tension. The printed surface cannot be smoothed afterwards with solvent in the case of ABS+. However, ABS+ can be mechanically reworked, for example with sandpaper, much better.

Characteristics:

• Very resistant
• Reliable bed adhesion
• Lower shrinkage rate, hence less warping
• Optimal layer adhesion
• Good impact resistance
• Resistant to many oils

Recommended printing parameters for ABS+:

• Print temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20%. Recommendation: 15% or off
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Filament Data Sheet

Technical Details:

• Color: Brown
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact resistance: 42kJ/m²
• Fracture elongation: 30%
• Tensile strength: 40MPa
• Form stability: Approx. 90°C
• Spool outer diameter: 20cm
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 229g
• Total weight: 1423g
• Dimension: 205 x 215 x75mm

Package Includes:

• 1x ABS+ Brown Filament 1.75mm 1Kg eSun